Godson Technology Co., Ltd
Guangzhou Godson Technology Co., Ltd
Add to Cart
Lipo 864770 3.7V 3000mAh Polymer Lithium Ion Battery With Good Safety
Li-polymer Battery List
| Type | Max Thickness (mm) | Max Width (mm) | Max Length (mm) | Voltage (V) | Capacity (mAh) | Weight (g) |
| Li-P703048 | 7.2 | 30.5 | 48.5 | 3.7 | 1100 | 20.0 |
| Li-P802035 | 8.2 | 20.5 | 35.5 | 3.7 | 500 | 12.0 |
| Li-P864770 | 8.8 | 47.5 | 70.5 | 3.7 | 3000 | 48.0 |
| Li-P902030 | 9.2 | 20.5 | 30.5 | 3.7 | 500 | 12.0 |
| Li-P983450 | 10.0 | 34.5 | 50.5 | 3.7 | 1600 | 29.0 |
| Li-P103035 | 10.2 | 30.5 | 35.5 | 3.7 | 1000 | 18.5 |
| Li-P103040 | 10.2 | 30.5 | 40.5 | 3.7 | 1200 | 22.0 |
| Li-P103450 | 10.2 | 34.5 | 50.5 | 3.7 | 1800 | 30.0 |
Product performance:
Voltage of single cell of lithium battery is 3.7V, but Ni-MH and Ni-Cd is only 1.2V, which means one lithium battery cell could replace three Ni-MH or Ni-Cd cells. Therefore, lithium battery pack has much smaller size than Ni-MH and Ni-Cd battery pack.
Self-discharge rate of lithium battery is 5% per month, which is much lower than Ni-MH and Ni-Cd (25% per month). Lithium battery has around 800 times of cycle life, which is also longer than Ni-MH and Ni-Cd(500 times). So lithium battery is replacing Ni-MH and Ni-Cd in more and more fields.
1. High working voltage for single battery cells
2. Pollution-free
3. Long cycle life
4. No memory effect
5. PCM inside with short-circuit protection function,over-discharge, over charge, over current protection
6. Good consistency, low self discharge
7. Light weight, small and customized size
8. Wide application for electronics and industry
Conductive Coating of Lithium Battery
A conductive coating is called pre coating, in the Lithium Battery industry usually coated on the surface of the anode current collector foil, a layer of conductive coating, coated with a conductive coating of aluminum foil is called pre coated aluminum foil or aluminum foil coating, the first experiment in the battery can be traced back to 70s, in recent years, with the new energy industry. Especially the lithium iron phosphate battery development fast, which becomes the hottest new technology and new materials.
The conductive coating can effectively increase the adhesion of the polar plate, reduce the usage of the binder and improve the electrical performance of the battery.
Application :
Lighting, backup power supply, wind energy storage, communication equipment, IT products, IC card terminal, GPS system, LED lights, medical equipment,instrumentation, beauty and hair products, electric toys, flashlight, miner's lamp, agricultural machinery equipment, electric tools, etc.
Handling of Cells
Consideration of strength of film package
Soft Aluminium foil
Easily damaged by sharp edge parts such as pins and needles, Ni-tabs, comparing with metal-
can-cased LIB.
Sealed edge may be damaged by heat above 100°C, bend or fold sealed edge.
Prohibition short circuit
Never make short circuit cell. It generates very high current which causes heating of the cells
and may cause electrolyte leakage, gassing or explosion that are very dangerous.
The LIP tabs may be easily short-circuited by putting them on conductive surface.
Such outer short circuit may lead to heat generation and damage of the cell.
An appropriate circuitry with PCM shall be employed to protect accidental short circuit of the
battery pack.
Mechanical shock
LIP cells have less mechanical endurance than metal-can-cased LIB.
Falling, hitting, bending, etc. may cause degradation of LIP characteristics.
Handling of tabs
The battery tabs are not so stubborn especially for aluminum tab.
Don’t bend tab.
Do not bend tabs unnecessarily.
Performance Curves of Lithium Cell:
1.Lithium Cell Charge Curve (Charge at 1C)
2. Lithium Cell Discharge Curve (Discharge at 1C )
3. Lithium Cell Cycle Life Curve
FAQ
Q1:Are these new cells?
A: Yes 100% ,factory direct.
Q2: Are you a trading company or manufacturer?A: We are globally trusted supplier and manufacturer of emergency lighting battery, emergency lighting products, whose batteries range covers Ni-Cd, Ni-MH, LiFePO4,Lion-polymer and other relevant lithium batteries.
Q3: Can you do OEM?
A: Yes, OEM is acceptable. You can provide the detailed specification requirements to us, our engineers can design the most suitable battery solution for you.
Q4: Is it possible to buy a sample to test?
A: Yes. You can buy a sample to test.
Q5:Where can I get the price?
A: Please Click Contact Now or Request a Quote. We will offer you the best quote in 24 hours after we get the product specifications such as voltage capacity application etc.