Godson Technology Co., Ltd
Guangzhou Godson Technology Co., Ltd
Add to Cart
Stainless Right Non - Illuminated Emergency LED Exit Light 3W 6500K
Technical Specifications
| Model | GS-301 |
| Size | 359*30*180mm |
| Power | 3W |
| Voltage | AC220V-50Hz |
| Emergency time | ≥ 3h |
| Battery | lithium battery/Ni-CD/Ni-MH |
| CCT | 6500 K |
| Lanp Luminous Flux | 300Lm |
| Protection Class | Exd IIBT6 |
| Operating Temperature | 0-40 ℃ |
1. The entrance – make sure the path to your front door is well-lit.
2. Near the front door – in case of a power outage, you’ll want to have a light near the entrance so you can see who is coming and going.
3. Basement stairs – install a motion-activated light to avoid accidents.
4. Bedroom – keep at least one light on all night, preferably by your bed.
5. Bathroom – put a light near the shower and another by the toilet.
6. Kitchen – place a lamp on the counter next to the stove in case of a power outage.
7. In pool and spa areas- You should install emergency lighting in pool and spa areas in your hotel for guest safety.
8. Near fire extinguishers- You should install emergency lighting near all fire extinguishers. This way, you’ll be prepared in case of an emergency.
9. Garage – keep a flashlight and extra batteries in your toolbox.
10. Outside your home – for finding your way around in case of a natural disaster like a hurricane or tornado.
Why would you use maintained over non-maintained emergency lighting?
The lighting type depends on the area you are trying to protect or light - if the site requires a constant light because it is in a highly used part of the property or the room is not well lit. A maintained emergency light would be a better choice than a place of little traffic that is sufficiently lit. A non-maintained emergency light would be a good selection. The fitting can be in a non-illuminated state during regular operation and then turn the lighting on should there be a power failure.